Desulfurizer generally refers to the agent for removing free sulfur or sulfur compounds from fuels, raw materials or other materials; In the control and treatment of pollutants, it mainly refers to the agents used to remove sulfur oxides (including SO2 and SO3) in waste gas. All kinds of alkaline compounds can be used as desulfurizers. Desulfurizer can make high sulfur coal generate salt solid substances when burning in the furnace, reduce the emission of sulfur dioxide gas, and has the functions of sulfur fixation and smoke reduction.

用途

purpose

主要用于半水煤气、水煤气、焦炉气、天然气、沼气、石油化工及化肥生产中变换气、CO 2 再生气等气体中硫化氢的脱除 。

It is mainly used to remove hydrogen sulfide from semi water gas, water gas, coke oven gas, natural gas, biogas, conversion gas, CO 2 regeneration gas and other gases in petrochemical and fertilizer production.

产品特点

Product features

1、脱硫精度高：进口H2SI1000ppm时，出口H2S 0.05ppm，比普通Fe2O3的脱硫精度(1ppm)高20倍；

1. High desulfurization accuracy: when the inlet H2SI1000ppm, the outlet H2S is 0.05ppm, 20 times higher than the desulfurization accuracy (1ppm) of ordinary Fe2O3;

2、反应速度快：使用空速1000-20000h-1比普通Fe2O3要高3—6倍；

2. Fast reaction speed: the airspeed of 1000-20000h-1 is 3-6 times higher than that of ordinary Fe2O3;

3、工作（透穿）硫容大：在1和2的条件下，一次性精脱H2S硫容有O2时为15—20%，是普通Fe2O3脱硫剂的3—6倍。

3. Large working (penetrating) sulfur capacity: under the conditions of 1 and 2, the sulfur capacity of one-time fine H2S removal with O2 is 15-20%, which is 3-6 times that of ordinary Fe2O3 desulfurizer.

4、强度好、耐水性好。水煮2h或浸泡30天不粉化、强度不变。

4. Good strength and water resistance. Boil for 2h or soak for 30 days without pulverization and strength change.

5、适用温度范围广，5—90℃

5. Wide temperature range, 5-90 ℃

6、可在无O2或高CO2条件下应用。无氧时精脱H2S硫容12—15%。

6. It can be used under the conditions of no O2 or high CO2. In the absence of oxygen, the sulfur capacity of fine H2S removal is 12-15%.

yl6809永利剂成分使用方法

Usage of components of biogas desulfurizer

1、 每吨煤加入本剂1.5-2.5Kg即可。

1. Add 1.5-2.5Kg of this agent to each ton of coal.

2、 将本剂充分溶解于水中，将此水溶液均匀地喷洒在需要加工成型或入炉前的燃煤上。

2. The agent is fully dissolved in water, and the aqueous solution is evenly sprayed on the coal that needs to be processed or put into the furnace.

3、 加放本品后，煤的含水量在12%为宜（每吨煤加水8-25Kg）。

3. After adding this product, the water content of coal should be 12% (8-25Kg per ton of coal).

以上就是为大家介绍的有关yl6809永利详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

The above is a detailed introduction to biogas desulfurization, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude