控制面板的维护和保养

Maintenance of control panel

控制面板维护的主要技术要点如下:

The main technical points of control panel maintenance are as follows:

(1)屏幕应保持清洁，不允许有灰尘和附着的水露。

(1) The screen shall be kept clean and free of dust and attached water dew.

(2)继电器的关键点应定期检查和更换，程控系统应定期检查。

(2) The key points of the relay shall be checked and replaced regularly, and the program control system shall be checked regularly.

(3)电缆终端的卡尺应定期检查，以确保紧密接触和不生锈。

(3) The calipers of cable terminals shall be checked regularly to ensure close contact and no rust.

(4)维修工作结束后，电缆应排列整齐，分类清晰。

(4) After the maintenance, the cables shall be arranged neatly and classified clearly.

2、仪器维护和保养

2. Instrument maintenance

仪器维护的技术要点如下:

The technical points of instrument maintenance are as follows:

(1)所有零件清洁无锈蚀；表盘刻度清晰；铭牌、标志、密封完好；定期检查和更换防潮剂。

(1) All parts shall be clean without rust; Clear dial scale; Nameplate, mark and seal are intact; Check and replace the moisture-proof agent regularly.

(2)使用酒精、清洗剂、超声波等方法清洗零件，严禁使用对零件有害的清洗剂。

(2) Use alcohol, cleaning agent, ultrasonic and other methods to clean parts. It is strictly prohibited to use cleaning agents harmful to parts.

(3)仪器仪表中的所有元件、探头、转换器和计算器应定期检修。

(3) All elements, probes, converters and calculators in instruments and meters shall be overhauled regularly.

(4)技术人员负责仪器仪表的维护。贵重仪器的维修应联系维修部门或厂家处理，不得随意拆卸。

(4) Professional technicians are responsible for the maintenance of instruments and meters. For the maintenance of valuable instruments, contact the professional maintenance department or manufacturer, and do not disassemble them at will.

(5)列入强制检定范围的仪器仪表应按时送技术监督部门检定。

(5) Instruments and meters included in the scope of compulsory verification shall be submitted to the technical supervision department for verification on time.

(6)仪表箱和电控柜的接地、储气罐避雷针的接地电阻和接线应由持证电工定期检查，防止接地接线断线、误接或电阻过大，在雷雨季节可能导致事故。

(6) The grounding of instrument box and electric control cabinet and the grounding resistance and wiring of lightning rod of air storage tank shall be regularly checked by certified electrician to prevent disconnection, misconnection or excessive resistance of grounding wiring, which may lead to accidents in thunderstorm season.

(7)大型仪器应按工厂操作说明书的要求进行维修和保养。如有难以判断的故障，应请厂家售后服务部门维修保养。

(7) Large instruments shall be repaired and maintained according to the requirements of the factory operation manual. If there is any fault that is difficult to judge, please ask the after-sales service department of the manufacturer for maintenance.

以上就是今天小编给大家提供的精彩内容，更多的精彩内容请点击进入我们的官方网站：yl6809永利http:

The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: biogas desulfurization http: